Bar Ends by REV LAYER. 3D printed and made to order in Cyprus. Product slide 1 of 6.

Bar Ends

Standard, 31 mm / Black / Black
€18,99
Skip to product information
Bar Ends by REV LAYER. 3D printed and made to order in Cyprus. Product slide 1 of 6.
1/8
  • Bar Ends by REV LAYER. 3D printed and made to order in Cyprus. Product slide 1 of 6.
  • Bar Ends by REV LAYER. 3D printed and made to order in Cyprus. Product slide 2 of 6.
  • Bar Ends by REV LAYER. 3D printed and made to order in Cyprus. Product slide 3 of 6.
  • Bar Ends by REV LAYER. 3D printed and made to order in Cyprus. Product slide 4 of 6.
  • Bar Ends by REV LAYER. 3D printed and made to order in Cyprus. Product slide 5 of 6.
  • Bar Ends by REV LAYER. 3D printed and made to order in Cyprus. Product slide 6 of 6.
  • Bar Ends, standard 31 mm, 3D model
  • Bar Ends, extended 43 mm, 3D model
Bar Ends

Bar Ends

€18,99
Length
Body Colour
Band Colour

Handlebar ends, 27.8 mm across, in two lengths: 31 mm standard and 43 mm extended. A pair.

The barrel carries a hexagonal pattern and a knurled band, and REV LAYER is engraved into the end cap. The hex body and the knurled band print in separate passes, so they can be two different colours. Choose the body colour and the band colour below.

Supplied

  • One pair of bar ends
  • The expanding anchor that holds the bar end inside the handlebar.

Made to order.

The 3D model

This is the actual part

Not a photograph taken from the one flattering angle. This is the geometry the piece is printed from, so you can turn it round and look at it from underneath before you decide.

Drag to turn it. On a phone you can place it in your room.

01

Made to order in Cyprus

Nothing here sits in a warehouse. Your piece is printed after you order, in Limassol, by the same people who designed it.

02

3 – 5 working days to make

Production time is quoted separately from delivery time, so you always know which part of the wait is which.

03

Ask before you buy

If you are unsure about a size, a colour or whether a part fits your machine, ask first. A question costs nothing and saves a return.

You may also like